Usb joysticks To Ps1 Console converter is possible ?

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
Dark Frost
Curious PSXDEV User
Curious PSXDEV User
Posts: 25
Joined: May 31st, 2016, 12:23 am
PlayStation Model: 4 x 9002

Usb joysticks To Ps1 Console converter is possible ?

Post by Dark Frost » July 10th, 2020, 10:28 am

ı imagine :? arduino based usb joystick to ps1 & ps2 console converter
ı search internet but ı didnt found anything :(
this converter is possible with arduino or some hardware ?
usb to playstation controller protocol is possible ?
or any easy way make pcb borard ?
I'm Newbie For Psx Developer :)
Test And Develop Console: 4 x SCPH-9002 + 1x SCPH-1002 + 2 x SCPH-102 + Psx Orginal Pal LCD Screen + 3x SCPH-1020 Memory Card + 2x SCPH-102 Memory Card + 1x Cheap Memory Card :)
Top
User avatar
Administrator
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2718
Joined: December 31st, 2012, 5:37 pm
I am a: Shadow
PlayStation Model: H2000/5502

Post by Administrator » July 28th, 2020, 4:22 am

People have made them before using an Arduino Leonardo. There is a PSX controller library you can use.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Top
Post Reply

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest