[FAIL] Sound problem with my dev. SCPH-7501

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

[FAIL] Sound problem with my dev. SCPH-7501

Post by LameGuy64 » January 25th, 2015, 11:11 am

I recently put together my dev. SCPH-7501 console to do some PlayStation prototyping again... But, I noticed that the sound is very weak and when the sound being played gets loud enough (such as the 'peak' when the SCE text shows up at start-up), it sounds completely garbled. I think it had something to do with a bad cap somewhere on the audio circuitry but I'm going to need some advice for fixing this issue... And no, I don't want to replace my console/board since I already got Direct AV and Serial I/O modded onto it.

Any useful help will be greatly appreciated!
Last edited by LameGuy64 on January 26th, 2015, 12:28 am, edited 1 time in total.
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

User avatar
Administrator
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2691
Joined: Dec 31, 2012
I am a: Shadow
PlayStation Model: H2000/5502

Post by Administrator » January 25th, 2015, 12:39 pm

Check the soldering on the direct AV mod.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

Post by LameGuy64 » January 25th, 2015, 4:08 pm

Nope, the soldering is still ok and I'm currently using a standard multi-av cable... The sound problem still persists.
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

User avatar
Administrator
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2691
Joined: Dec 31, 2012
I am a: Shadow
PlayStation Model: H2000/5502

Post by Administrator » January 25th, 2015, 4:37 pm

Check the IC's mentioned in this topic: http://www.psxdev.net/forum/viewtopic.php?f=24&t=616
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

Post by LameGuy64 » January 26th, 2015, 12:28 am

Well, I gave up after realizing that replacing the SPU didn't fix the problem. Instead, it only made the sound worse (constant buzzing). Besides, I have a bunch of extra fat PlayStations lying around in my scrap heap (SCPH-7000s) which I could migrate the parts from my now dead dev. console into it and replacing the ROM BIOS with the one from an SCPH-7501 so it'll boot discs of any region.
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests