Difference between SCPH-102A and SCPH-102C?

Post by **Steveproxy** » August 26th, 2018, 12:56 am

Hi, what is the difference between PSone SCPH-102A and SCPH-102C ?
Do they have different diagram to mod the ONEchip (pic 12c508) on own motherboard ?
I have seen that FatCat proposes two different diagrams (with 8 wires), I think the first diagram is for SCPH-102A

In these the pin 8 is linked on different points

Post by **Administrator** » August 26th, 2018, 7:07 pm

I think it just comes down to the chip itself and the code (binary) that is programmed, because each GPIO pin on a PIC MCU can be changed around to be whatever, so they probably had many different revisions for the binary that was flashed.

As for revision A versus C, I can't tell you. It might just be a different BIOS revision or some minor tweak on the PCB.

Post by **Steveproxy** » August 28th, 2018, 6:25 am

Ok so the difference is just about the chips on the motherboard (hardware)
Does scph-102c has to be modded with a different diagram than scph-102a's?

Post by **Administrator** » August 28th, 2018, 7:28 pm

Steveproxy wrote: August 28th, 2018, 6:25 am Does scph-102c has to be modded with a different diagram than scph-102a's?

I don't think so.