Hi, guys.
I just bought ps scph-9000 directly from Japan, and install chip mmc3 in it, but due of cuted Japanese bios it boot only Japanese backups.. Is it possible to use some bootcd to load another region games?
scph-9000 ntsc-j + mmc3
-
Administrator
Verified - Admin / PSXDEV
- Posts: 2691
- Joined: Dec 31, 2012
- I am a: Shadow
- PlayStation Model: H2000/5502
You need to either patch the images, swap the BIOS ROM or use CAETLA.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
I would like to play original license games.. so there is only one way: replace bios. i c, thank you!
i have broken scph-1002, does bios rom chip compatible with scph-9000?
i have broken scph-1002, does bios rom chip compatible with scph-9000?
-
Administrator Verified
- Admin / PSXDEV
- Posts: 2691
- Joined: Dec 31, 2012
- I am a: Shadow
- PlayStation Model: H2000/5502
Yes, you can use a 1002 BIOS on a 9000. I hope you have good soldering skill though.
I reckon you're rather off buying a new laser for the 1002 and putting the MM3 in that instead of the 9000.
I reckon you're rather off buying a new laser for the 1002 and putting the MM3 in that instead of the 9000.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
1002 is completely dead 
CXD8561Q have black spot on it..
CXD8561Q have black spot on it..Could you help me and show what of this chip is bios chip?
https://www.dropbox.com/s/22xii7whrc5i3 ... .57.27.jpg
https://www.dropbox.com/s/22xii7whrc5i3 ... .57.27.jpg
it works!!! thx!!!
-
Administrator Verified
- Admin / PSXDEV
- Posts: 2691
- Joined: Dec 31, 2012
- I am a: Shadow
- PlayStation Model: H2000/5502
You're welcome
You do not have the required permissions to view the files attached to this post.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Who is online
Users browsing this forum: No registered users and 3 guests
, "PlayStation", 
, 
, "DUALSHOCK", "Net Yaroze" and "PSone" are registered trademarks of Sony Computer Entertainment Inc. 
.
