Basically its the source of Serial v1.3 by Hitmen but with selectabe serial speed.
Uses a very simple serial cable (rxd/txd/gnd) that is easy to build.
The client is written in Python 3, and has been tested on Python 3.7 on both Windows and Linux. It requires pyserial, which isnt always included. Google can help if you get stuck.
You can use two speeds - 115,200bps or 345,600bps. Once you have selected the requried speed on the PSX, use the corresponding on the client..
Code: Select all
usage : sioload.py commands -run : upload & execute PSX-EXE @115.2k (PSXSERIAL/UNIROM/HITSERIAL compatible) -trun: upload & execute PSX-EXE @345.6k (SIOLOADER only) where is the name of your serial port and is the name of the file to upload/download eg : sioload.py -run /dev/ttyUSB0 greentro.exe sioload.py -trun COM5 trancetro.exe
Size limit should be similar to Serial v1.3 ~1700k.
345,600bps - I have only tested this with a GENUINE FTDI USB UART. If you have issues switch to 115,200bps.