I have these tileset images that I would prefer not having to split up into several smaller 256x256 subsets. If i understand the psyq documentation correctly then it is not possible, but I've seen some hints here and there in other projects that it is.
In my attempts the image just overlaps as soon as the width exceeds 256.
Just curious
GsIMAGE spanning multiple texture pages possible?
- mzxtuelkl
- Curious PSXDEV User
- Posts: 20
- Joined: Jul 26, 2021
- PlayStation Model: SCPH-5501
- Location: United States
- Contact:
The 256x256 limit is a hardware limitation (according to the nocash docs), so either uploading large textures to VRAM or trying to access tiles exceeding your original tpage will cause issues unless you use a workaround.
-
Shadow Verified
- Admin / PSXDEV
- Posts: 2670
- Joined: Dec 31, 2012
- PlayStation Model: H2000/5502
- Discord: Shadow^PSXDEV
One trick might be to program it so your 3D model uses two 256 x 256 pages and aligns them to seem seamless as one continuous texture.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Who is online
Users browsing this forum: No registered users and 3 guests