how to mod chip 12C50XX on icprog software?

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
What is PSXDEV?
What is PSXDEV?
Posts: 4
Joined: December 19th, 2012, 2:56 pm

how to mod chip 12C50XX on icprog software?

Post by jfar223344 » January 3rd, 2013, 3:50 pm

How to program chip pic 12C50xxusing jdm programmer/icprog? Do you have detailed guidelines on it? I'ved already build a programmer and doesn't work on me. Maybe i missed something. Im from the Philippines and it's not practical for me to order on it thru net. I just need a detailed info on programming. Thanks a lot in advance! Any help would greatly appreciated.

PSIO Donator
PSIO Donator
Posts: 8
Joined: May 16th, 2012, 12:15 pm
Location: Sassari (Sardinia, Italy)

Re: how to mod chip 12C50XX on icprog software?

Post by alex.d93 » January 5th, 2013, 12:26 pm

Hi jfar223344,
First of all, your serial port must supply 13v to MCLR/VPP pin of the chip! If it doesn't, your pic will not enter in programming mode! (as you can read here HERE)
Which JDM programmer are your using? can you show me some pictures of it?
Second, I think the best JDM programmer is THIS!
I suggest you to use PICPgm to program your chip! it also automatically detects chip and programmer! LINK
But...why are you trying to program that chip? It can only be programmed once! (buy 12f629 chip, can be programmed 100,000 times, because has a flash memory!).


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest