Setup with PSIO

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
mrhaboobi
Active PSXDEV User
Active PSXDEV User
Posts: 55
Joined: November 18th, 2012, 1:13 pm

Setup with PSIO

Post by mrhaboobi » October 31st, 2018, 11:21 am

Hey Guys

Wondering about the best set up. have but dont use a net yaroze with sicons. Thats what im previously use to. Whats teh modern approach now days? PSIO ? Something else. anyone get details information on different approaches?

Cheers
Greg

User avatar
danhans42
/// PSXDEV | ELITE ///
/// PSXDEV | ELITE ///
Posts: 270
Joined: November 28th, 2012, 11:51 pm
IRC: danhans42
PlayStation Model: SCPH-7502
Want to Find: Inspiration
Location: West Yorkshire, UK
Contact:

Re: Setup with PSIO

Post by danhans42 » October 31st, 2018, 7:20 pm

Best setup I find is still an Xplorer flashed with Caetla + parallel printer port cable. You can use modern operating systems to communicate with it using catflap, for which there are both Linux & Windows ports. This gives you the most flexibility.

For Simplicity, you have psxserial using the serial port.
♥ PSX - http://psx0.wordpress.com

My collection - SCPH-102/SCPH-7502, Yaroze Modded PSone, PocketStation (Clear), 2x Xplorer Carts, 2x Xplorer Pro, 2x AR Carts (1 with Ezoray), GS Pro 3, ISA Comms Link Card. Various USB serial devices, Gameshark Sharklink, Kentai Eddy, iMode Cable & other bits and bobs.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest