Hi everyone, I'm new here but sometimes I read this forum because it's very fascinating. I decide to register since I have a problem. So, I have this jade green PAL debug (late PU-8 board) from quite some time. From when I bought it was playing games correctly. Then after leaving it in the closet for about 3 months untouched it just refused to boot up the games (original won't just load). Audio cd are recognized correctly and play just fine. The console starts to read the game disc but it seems to refuse to "change" speed, it just stops and starts again at reading the disc infinitely, it doesn't reach the playstation region logo. I've tried two correctly working PSone laser unit, no change....
Hope someone can give me some hints.
Thank you.
Green debug playing only audio cd
-
Shadow Verified
- Admin / PSXDEV
- Posts: 2670
- Joined: Dec 31, 2012
- PlayStation Model: H2000/5502
- Discord: Shadow^PSXDEV
The board itself might need to be calibrated because the older PU-7/PU-8 boards didn't do automatic calibration. Only the later board revisions did that.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Who is online
Users browsing this forum: No registered users and 1 guest