Can someone run this Trainer?

[inc^lightforce]

hi,

a good friend of mine have maybe the biggest? PS1 Cracktro channel on Youtube. I support as good as i can. But now we face a problem:

Dynamite's PS1 Trainer by Neimod (don't have anymore contact to him) made this one for "Megaman 8"

I tried everything to run his PSX Exe but all i see is always a black screen.

- Is someone able to run this Trainer? (attached)

- Is someone able to reverse the code that i can see what he did wrong to fix the line or address that the PSX Exe run properly without black screen?

thanks for reply.

[DevilmanXXL]

Thank you so much for your support, we have known each other since 2010 through YT and then on Skype I hope that something can be done with this intro I would not call it damaged!

[Gandhi]

Hi INC,

use this package.....
this will work with pcsx-redux

bye
Gandhi

[inc^lightforce]

Hi INC,

use this package.....
this will work with pcsx-redux

bye
Gandhi

Hey Gandhi are you the one who was a part of my old Group Undercover-Agents?

If yes, please contact me because you and me were really close friends in the past. Do you remember?

Aha, wenn Du wirklich aus Österreich kommst, dann bist Du es.
Ich suche dich seit Jahren !

[Gandhi]

Hi Inc,

Yes i am
Was a nice time with the PSX and the Cracktros
I even still have all the ICQ numbers of ObiWahn, Goose, LoWang, CrazyMike etc.
Unfortunately no one is active on ICQ anymore

Ich schreib dir eine PM mit meiner Email Adresse.
Bis später

Gandhi

[R3k]

By the way, many intros are coded for the newer GPU revision of the PSX:
https://psx-spx.consoledev.net/graphics ... right-x2y2
They do use the Y-coordinate bits which are unsupported on the older GPU. Moreover, many emulators have got a problem with this one too (be it Sony ones or homebrew pSX). To fix them you need to patch the 0xE04 command with restricted drawing area corners. Two examples from affected cracktros:
Sydney 2000 PAL-UK PDX: 0x8010212c -> 0xe4080200 patched to 0xe407fdff
Spyro 3 PAL PDX: 0x8002C24C -> 0xe4080200 patched to 0xe407fdff

[inc^lightforce]

The Problem is, that we use nowadays Emul8ors. I left my original Dev SDK since years, when i figured out, that Emu's also make a great Job. On the other Hand, i don't want set up the old Environment to code because i don't have enuff space in my Office . And this lead me back to the start at the circle. Modern Windows, modern Hardware, coding/ programming is working as well but emulating is horrible . And that's the piont when some codework fail, but it would not fail if i use the original SDK plus Hardware.

It's like the Devil