I was built the PSX blaster, to work it, need write firmware.
no one wants to write code :/ (doesn't works with regular bios)
Shadow wrote:
"It needs a lot of programming to get it to work as intended"

"I know an AR cart was in development here on this forum with a USB port, but is it still available ?"
Do you mean for PSX Blaster ?

If i good to see it has two screw, and snap apart.

SCPH-1160
SCPH-1160
SCPH-1060

Warning If you would like to order from ebay or Aliexpress ! these are the chinese lame poor clone laser lens the main problem the poor not fit mechanics/gears. I have did ordered for my SCPH-5502 "new" laser pickup KSM-440ADM but all are has mechanics bug (KSM-440ADM for SCPH-100x-550x) now I am cu...

WooW This makes life easier !
Thank You =)

NITROYUASH wrote: ↑

September 21st, 2020, 6:52 pm

same, i should select a car/plane/truck/etc, every time when i want to read this forum, this is so annoying.

YES same here, this is hella annoying !

@samspin

I've SCPH-5502/PU-18 waiting for 8MB RAM Modification
l really look forward to the result

so appear to be compatible, or compatible?

Well, I will confirm ! on Win98SE/Me I have installed VCOMSLNK.VXD and using Freewing hardware, and i get it works the PSX HACK tools, Like: ACTION.EXE PSDebug.exe PsPar.exe Craction.exe gscc.exe etc etc Little slower than CommsLink but works, also randomly its freeze up, during large memory dump. B...

Shadow wrote: ↑

January 22nd, 2020, 12:47 pm

I've tried PSDebug. It isn't good. It's very, very old and outdated. NO$PSX is much better.

I means if I use "VCOMSLNK.VXD" then i can use PSDebug.exe etc vith PAR-device via parallel port using freewing harware
and manage saves/codes etc?

If i good understand it, with my bad English... The VCOMSLNK.VXD = "Virtual Pro Comms Link Driver can hook I/O access to Pro Comms Link I/F board" I thought with hella simple: So connect my Freeweng hardware one side to PC-Pralellport, then connect second side to PAR (pro action replay cardridge) an...

"It was worth a try once no ?"
I did it once.. and it won't work with regular XP/PAR.rom
"you're wasting time/money"
Probably yes, but we now know it doesn't work..
Like you said..Except if :
"It needs a lot of programming to get it to work as intended"

about author
elseif key=5
x[1] = (x[1] + 057h) ;"W"ayne
x[2] = (x[2] + 042h) ;"B"eckett
x[3] = (x[3] + 031h) ;"1"
x[4] = (x[4] + 032h) ;"2"
x[5] = (x[5] + 033h) ;"3"

Getting starting..

oh.. thanks the info..
what happent with PSEXE.COM for win7 ?

@sicklebrick Well, Thanks this great modification :) (oh 2016?) I've tested proper it: under Windows XP and Windows 7 32bit in BIOS i set ECP+EPP using 0x378 port (typical) using regular V2,x rom for Hardware breakpoint test etc.. Works like a charm, dump the memory, and serach in memory set breakpo...

No one built this hardware ,no one tested.
Shadow wrote:
"It needs a lot of programming to get it to work as intended"

привет

Here is the current result :/

Took me half years, til get the PIO connectors from Cybdyn.
Currently I don't have time to assemble..
I will ASAP to do and post here the result.

I found another "device" in the datel family, called Action Replay..,

Kool Thank you.. i will try in weekend.

EDIT: I've tried and works like a charm.. thanks to nocash !
I used PSXloader via caetla and hot swap. done...

I've tried flash Gamer PSX-003.bins into Action Replay cartridge who has (2 Mbit 29EE020) using Caeflash.com, but black screen. This dump will only work properly/at all with Gamars Movie Card devices. Hey Squaresoft74 Got it, and thank you the "hot swap step guide" for Xplorer it saved my two FX ca...