Search found 33 matches
- October 26th, 2017, 9:26 am
- Forum: Hardware
- Topic: Resetting the BIAS AND GAIN POTS on the PU-7/PU-8-11 board.
- Replies: 1
- Views: 4386
- October 26th, 2017, 8:41 am
- Forum: Hardware
- Topic: Resetting the BIAS AND GAIN POTS on the PU-7/PU-8-11 board.
- Replies: 1
- Views: 4386
Resetting the BIAS AND GAIN POTS on the PU-7/PU-8-11 board.
Hi all, I have an SCPH-1001 from August 1995 that i accidentally touched the BIAS AND GAIN pots on. It's the one with the pots from a PU-7 which can be confusing. Here is a picture on what i mean on those type of pots: POT (VA2).PNG This is the POT of a later SCPH-1001 which is so easy to work on: f...
- October 18th, 2017, 2:41 pm
- Forum: Hardware
- Topic: What is the best PS1 model to have?
- Replies: 7
- Views: 18323
Re: What is the best PS1 model to have?
Thank goodness for the higher votes on SCPH-7501. The reason i rage quit the SCPH-1001 because they were always skipping no matter what even with a good laser installed. In my case, I had a PU-8-11 board that had different pots from an SCPH-1000 that were not the same as the PU-8-21 to 23 and it mad...
- October 17th, 2017, 10:03 am
- Forum: Hardware
- Topic: What is the best PS1 model to have?
- Replies: 7
- Views: 18323
Re: What is the best PS1 model to have?
Resurfacing will help, but what it comes down to is the quality of the deck itself and optics in the drive. It also needs to be calibrated. It's a real pain though since you need an analog oscilloscope to calibrate it correctly. I'm sorry Shadow, but what is the best PS1 model to have that is not a...
- October 16th, 2017, 10:08 pm
- Forum: Hardware
- Topic: What is the best PS1 model to have?
- Replies: 7
- Views: 18323
Re: What is the best PS1 model to have?
SCPH-100x with a new laser, modchip and PSIO. Hi Shadow, Okay, So SCPH-100x is the way to go then? I have a BAM laser though i might do that. Also do you think resurfacing discs might help? Also would a clean disc and a clean laser improve your lifespan of your PS1? With some scratches discs depend...
- October 16th, 2017, 2:54 pm
- Forum: Hardware
- Topic: What is the best PS1 model to have?
- Replies: 7
- Views: 18323
What is the best PS1 model to have?
Hi everyone, I'm in the process of reparing an SCPH-1001 that i have coming in the mail. It's one made August 1995 with an -11 board where it has the audio swap method and i'm planning on swapping the AAM with a superior BAM laser. Notice any differences between the PU-8-11 (Early US 1995 PU-8 with ...
- August 1st, 2017, 6:15 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
Today i bought another SCPH-1001 made August 1996 and i noticed it has the more reliable metal KSM-440-ACM lens assembly instead of plastic since it doesn't sit lower. Is the metal ACM reliable the same way as the BAM? The specific problem with the plastic frame wearing was fixed on those ACMs with...
- August 1st, 2017, 3:04 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
Okay, I think that would be good enough. Having the metal KSM-440-ACM lens.
- July 31st, 2017, 1:37 pm
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
Today i bought another SCPH-1001 made August 1996 and i noticed it has the more reliable metal KSM-440-ACM lens assembly instead of plastic since it doesn't sit lower. Is the metal ACM reliable the same way as the BAM?
- June 7th, 2017, 4:26 pm
- Forum: Hardware
- Topic: Any differences with the Sony A2106R and H7240AKV encoders?
- Replies: 9
- Views: 14800
Re: Any differences with the Sony A2106R and H7240AKV encode
I can send pictures if you want me to: Console Bottom: Serial reading U6853474 https://s25.postimg.org/jdldznzrj/IMAG0043.jpg Console Inside: (The Power supply was it's original one and it was swapped with a red LED. I have a new PSU in it now) https://s25.postimg.org/uegj4os0f/IMAG0044.jpg Board: h...
- June 5th, 2017, 5:33 am
- Forum: Hardware
- Topic: Anyone know a trick with the SoundScope
- Replies: 4
- Views: 8299
Re: Anyone know a trick with the SoundScope
what caused it to blow a fuse. was it on the board or on PSU?
- June 4th, 2017, 5:43 am
- Forum: Hardware
- Topic: Anyone know a trick with the SoundScope
- Replies: 4
- Views: 8299
Re: Anyone know a trick with the SoundScope
Anyone? And why does no one reply to me?
- June 2nd, 2017, 4:53 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
Thanks for helping me on my 1001 project. And also, check out my Soundscope post as i'm a huge fan of the PS1 and always visit here. http://www.psxdev.net/forum/viewtopic.php?f=47&t=1284
- June 2nd, 2017, 4:19 am
- Forum: Hardware
- Topic: Anyone know a trick with the SoundScope
- Replies: 4
- Views: 8299
Anyone know a trick with the SoundScope
I was listening to music on an SCPH-7501 when i was on Sound Scope and i noticed something really cool. When i held X and pressed R1, I could see a red circle meaning for recording :D :D Know any combinations?: What does the Green mean? What does the orange on right side mean? What does the orange o...
- June 2nd, 2017, 4:16 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
I have set the laser intensity to 1.5 MV on a BAM laser and it's reading pefectly. Thank you guys for helping me on my 1001 project. Is 1.5 MV good enough?
- May 28th, 2017, 6:51 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
And oh, sometimes i have to reset it if it doesn't read first try
- May 28th, 2017, 6:39 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
Good news guys, I got an 1001 going with the Mulitmeter and KSM-440-BAM pulled from a PSone. It made it better. Is 18.57 or higher good enough?
- May 26th, 2017, 8:38 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
sorry guys. forgive me
- May 26th, 2017, 7:10 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
I know how to look out for the power supply, and i'm referring to the video where he solders a wire:
[youtube]http://www.youtube.com/watch?v=_wCKui1zaBY[/youtube]
[youtube]http://www.youtube.com/watch?v=_wCKui1zaBY[/youtube]
- May 25th, 2017, 11:53 am
- Forum: CD-ROM
- Topic: My SCPH-1001 should be coming soonCan i use the PS1 slimlens
- Replies: 39
- Views: 89751
Re: My SCPH-1001 should be coming soonCan i use the PS1 slim
well if it's a 1001, then okay, but what do you mean it's not my thingrama3 wrote:Let me suggest you just buy a working console. This is clearly not your thing ;p