Hi there

Post a topic about yourself to let others know your skills, hobbies, etc.
Post Reply
User avatar
Gemini
Verified
Active PSXDEV User
Active PSXDEV User
Posts: 44
Joined: February 14th, 2012, 4:35 am

Hi there

Post by Gemini » February 14th, 2012, 4:42 am

Well, you probably know me already. Just dropping a message to let you know I'm here as well.
Cheers.

User avatar
Administrator
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2717
Joined: December 31st, 2012, 5:37 pm
I am a: Shadow
PlayStation Model: H2000/5502

Post by Administrator » February 14th, 2012, 5:52 pm

Welcome!
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

User avatar
Gemini
Verified
Active PSXDEV User
Active PSXDEV User
Posts: 44
Joined: February 14th, 2012, 4:35 am

Post by Gemini » February 15th, 2012, 9:39 pm

Well, you got me there with the PSIO project. Looking forward to it, it seems definitively promising especially considering how much it progressed in the last few weeks. I'm very interested in developing something for it when the hardware is done and ready to be tested.

User avatar
Administrator
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2717
Joined: December 31st, 2012, 5:37 pm
I am a: Shadow
PlayStation Model: H2000/5502

Post by Administrator » February 16th, 2012, 12:36 am

Yes. We have been working very hard.
PSIO will be a success. There is no doubt there. It may take a while to develop, but it will happen.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

User avatar
Gemini
Verified
Active PSXDEV User
Active PSXDEV User
Posts: 44
Joined: February 14th, 2012, 4:35 am

Post by Gemini » February 16th, 2012, 2:22 am

Waiting for the specs here.

eletronx
Interested PSXDEV User
Interested PSXDEV User
Posts: 7
Joined: February 7th, 2012, 3:36 am
Location: Sao Paulo, Brazil

Post by eletronx » February 16th, 2012, 12:32 pm

Hi there, I made my first donation, when we do have a target I will do another donation. The PSIO is awesome!

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests