which the proper pin parallel cable?
[DOWNLOAD] All PSX CAETLA Versions and CAEFLASH
Forum rules
Do not post any new topics here. You can reply in the existing topics, but do not create new ones. If you do they will be moved or deleted.
Do not post any new topics here. You can reply in the existing topics, but do not create new ones. If you do they will be moved or deleted.
- bizarro2011
- Serious PSXDEV User
- Posts: 118
- Joined: Mar 27, 2012
- Location: Brazil
-
Shadow Verified
- Admin / PSXDEV
- Posts: 2670
- Joined: Dec 31, 2012
- PlayStation Model: H2000/5502
- Discord: Shadow^PSXDEV
You need a direct and straight through cable. They are a little hard to find nowadays because most of them are wired for printer use, in which, they skip a few pins.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
That picture looks correct. You need one with male db25 at one end & female db25 at the other (also known as an extension cable). Some Male to Female DB25 are for RS232 or printer switch boxes and neither of those require all 25 pins to be connected, so you might have problems if it doesn't mention that all pins are connected straight through.bizarro2011 wrote:which the proper pin parallel cable?
The description on this sounds like it would work http://www.ebay.co.uk/itm/Serial-RS232- ... 1393076352 (I'm not recommending it & I haven't looked at whether that is a fair price but it's what you need to be looking for).
Last edited by Anonymous on April 25th, 2015, 2:54 am, edited 4 times in total.
-
Shadow Verified
- Admin / PSXDEV
- Posts: 2670
- Joined: Dec 31, 2012
- PlayStation Model: H2000/5502
- Discord: Shadow^PSXDEV
smf wrote:Male one end & female the other, also known as an extension cable. Ideally one with all 25 pins connected straight through. Some Male to Female DB25 are for RS232 or printer switch boxes and neither of those require all 25 pins, so you might have problems if it doesn't mention that all pins are connected.bizarro2011 wrote:which the proper pin parallel cable?
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Hi Guys. I have flashed version .38 onto my xploder and it works but there are no cheats. How do I get cheats onto it?
I tried caetla 0.37 and it uses cheats off the memory card that works fine but I can only use it with original disks because the drive does not unlock when it boots up ? it just keeps spinning
Is there a setting in the menu to that I need to change ? or is it just lame and cant boot copies?
Is there a setting in the menu to that I need to change ? or is it just lame and cant boot copies?
Who is online
Users browsing this forum: Bing [Bot] and 5 guests