Can Ä± Connected CP2102 to memory card ?

Post by **Dark Frost** » June 19th, 2016, 10:25 am

I have usb to uart-ttl modÃ¼le CP2102 can Ä± connected with memory card or psx controller ?
http://www.ebay.com/itm/CP2102-USB-2-0- ... 0683943875

Post by **LameGuy64** » June 19th, 2016, 11:38 am

You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.

Post by **Dark Frost** » June 19th, 2016, 9:12 pm

LameGuy64 wrote:You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.

Thanks For Helping LameGuy64
How Can I Connected Serial I/O port to psx ?
only 3 wire rx tx and gnd work ?
or Ä± need connect more cable ?

Post by **LameGuy64** » June 20th, 2016, 8:58 pm

Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).

Post by **Dark Frost** » June 21st, 2016, 3:13 pm

LameGuy64 wrote:Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).

thnx again