Can ı Connected CP2102 to memory card ?

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
Dark Frost
Curious PSXDEV User
Curious PSXDEV User
Posts: 25
Joined: May 31, 2016
PlayStation Model: 4 x 9002

Can ı Connected CP2102 to memory card ?

Post by Dark Frost » June 19th, 2016, 10:25 am

I have usb to uart-ttl modüle CP2102 can ı connected with memory card or psx controller ?
http://www.ebay.com/itm/CP2102-USB-2-0- ... 0683943875
I'm Newbie For Psx Developer :)
Test And Develop Console: 4 x SCPH-9002 + 1x SCPH-1002 + 2 x SCPH-102 + Psx Orginal Pal LCD Screen + 3x SCPH-1020 Memory Card + 2x SCPH-102 Memory Card + 1x Cheap Memory Card :)

User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

Post by LameGuy64 » June 19th, 2016, 11:38 am

You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

Dark Frost
Curious PSXDEV User
Curious PSXDEV User
Posts: 25
Joined: May 31, 2016
PlayStation Model: 4 x 9002

Post by Dark Frost » June 19th, 2016, 9:12 pm

LameGuy64 wrote:You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.
Thanks For Helping LameGuy64
How Can I Connected Serial I/O port to psx ?
only 3 wire rx tx and gnd work ?
or ı need connect more cable ?
I'm Newbie For Psx Developer :)
Test And Develop Console: 4 x SCPH-9002 + 1x SCPH-1002 + 2 x SCPH-102 + Psx Orginal Pal LCD Screen + 3x SCPH-1020 Memory Card + 2x SCPH-102 Memory Card + 1x Cheap Memory Card :)

User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

Post by LameGuy64 » June 20th, 2016, 8:58 pm

Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

Dark Frost
Curious PSXDEV User
Curious PSXDEV User
Posts: 25
Joined: May 31, 2016
PlayStation Model: 4 x 9002

Post by Dark Frost » June 21st, 2016, 3:13 pm

LameGuy64 wrote:Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).
thnx again :)
I'm Newbie For Psx Developer :)
Test And Develop Console: 4 x SCPH-9002 + 1x SCPH-1002 + 2 x SCPH-102 + Psx Orginal Pal LCD Screen + 3x SCPH-1020 Memory Card + 2x SCPH-102 Memory Card + 1x Cheap Memory Card :)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 5 guests