UniROM 8.0.K - GDB Debugging, install/backup to/from memory card, homebrew from memcard, etc

Downloadable items posted by PSXDEV members are within this forum.
User avatar
Puppydogpals
Curious PSXDEV User
Curious PSXDEV User
Posts: 14
Joined: Jul 15, 2020

Post by Puppydogpals » July 19th, 2020, 8:05 am

Haker120 wrote: July 19th, 2020, 5:33 am Try to hold L1 + L2 before X and hold until it'll show generic 128k cartridge.
OK I was doing it wrong, now comes up as cart id overide however result is same. Says erasing
, successfully erased then flash failed. Cart is untouched.

No matter got one flashed, would of been a spare anyway, maybe flashable in the future

User avatar
Squaresoft74
Verified
/// PSXDEV | ELITE ///
/// PSXDEV | ELITE ///
Posts: 303
Joined: Jan 07, 2016
PlayStation Model: SCPH-7502
Location: France
Contact:

Post by Squaresoft74 » July 19th, 2020, 10:57 am

Mdv wrote: July 19th, 2020, 7:39 am I have the parallel cable and x86 windows 7
Try uploading exe using either No$psx or attached X-Killer.
You do not have the required permissions to view the files attached to this post.

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 19th, 2020, 10:42 pm

Squaresoft74 wrote: July 19th, 2020, 10:57 am
Mdv wrote: July 19th, 2020, 7:39 am I have the parallel cable and x86 windows 7
Try uploading exe using either No$psx or attached X-Killer.
upload with the patched x-killer, now on the newest rom. the version you posted says xrun1ff.bin file is missing

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 19th, 2020, 11:45 pm

Puppydogpals wrote: July 19th, 2020, 8:05 am
Haker120 wrote: July 19th, 2020, 5:33 am Try to hold L1 + L2 before X and hold until it'll show generic 128k cartridge.
OK I was doing it wrong, now comes up as cart id overide however result is same. Says erasing
, successfully erased then flash failed. Cart is untouched.

No matter got one flashed, would of been a spare anyway, maybe flashable in the future
Then show @sickle how chips on your cartridge look like. I had pure fluke my was able to flash. ;)

User avatar
Squaresoft74
Verified
/// PSXDEV | ELITE ///
/// PSXDEV | ELITE ///
Posts: 303
Joined: Jan 07, 2016
PlayStation Model: SCPH-7502
Location: France
Contact:

Post by Squaresoft74 » July 20th, 2020, 2:51 am

Mdv wrote: July 19th, 2020, 10:42 pm upload with the patched x-killer, now on the newest rom. the version you posted says xrun1ff.bin file is missing
X-killer is really outdated this can happen depending on your rom version.
No$spx is prefered here after doing this 1 wire mod (the switch is optional).

User avatar
Puppydogpals
Curious PSXDEV User
Curious PSXDEV User
Posts: 14
Joined: Jul 15, 2020

Post by Puppydogpals » July 20th, 2020, 3:08 am

Haker120 wrote: July 19th, 2020, 11:45 pm
Then show @sickle how chips on your cartridge look like. I had pure fluke my was able to flash. ;)
What version did you flash?

@sickle pictures of chip and id that I can't flash,

i accidently cloned the cart to itself and it said it done it successfully, percentage went up anyway.

Also any idea of why I had issues with cheat discs as per previous posts

Also the clone cart page looks corruot as it looks like it's merged with another page that mentions dont stare at laser!

If you need more pics let me know
15951743490782.jpg
15951743490511.jpg
15951743489980.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 20th, 2020, 5:06 am

I flashed the newest available 8.0.bB but I had to hold L1+L2.

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 24th, 2020, 8:07 am

Puppydogpals wrote: July 20th, 2020, 3:08 am
Haker120 wrote: July 19th, 2020, 11:45 pm
Then show @sickle how chips on your cartridge look like. I had pure fluke my was able to flash. ;)
What version did you flash?

@sickle pictures of chip and id that I can't flash,

i accidently cloned the cart to itself and it said it done it successfully, percentage went up anyway.

Also any idea of why I had issues with cheat discs as per previous posts

Also the clone cart page looks corruot as it looks like it's merged with another page that mentions dont stare at laser!

If you need more pics let me know

15951743490782.jpg

15951743490511.jpg

15951743489980.jpg
i just flased my smart cartridge with no problems. make sure the switch is in the on position.
or you could use the over burn mod

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 24th, 2020, 9:16 pm

@Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 24th, 2020, 9:46 pm

Haker120 wrote: July 24th, 2020, 9:16 pm @Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?
this is my cart
You do not have the required permissions to view the files attached to this post.

User avatar
Puppydogpals
Curious PSXDEV User
Curious PSXDEV User
Posts: 14
Joined: Jul 15, 2020

Post by Puppydogpals » July 24th, 2020, 11:51 pm

Haker120 wrote: July 24th, 2020, 9:16 pm @Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?
Mdv wrote: July 24th, 2020, 9:46 pm
Haker120 wrote: July 24th, 2020, 9:16 pm @Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?
this is my cart
What does unirom report your chip as?

Mine is a CSI CAT28F010N GAMEHUNTER/PSWD
20200724_135037.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 25th, 2020, 12:33 am

And this is my Smart Cartridge, I can't flash it anymore unless I'll force generic 128k one (L1 + L2) so I don't remember how it was detected as.

Image

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 25th, 2020, 2:30 am

Puppydogpals wrote: July 24th, 2020, 11:51 pm
Haker120 wrote: July 24th, 2020, 9:16 pm @Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?
Mdv wrote: July 24th, 2020, 9:46 pm
Haker120 wrote: July 24th, 2020, 9:16 pm @Mdv I bet your Smart Cartrige is on legged chips like mine, Puppydogpals has square chip with no legs soldered directly so maybe just incompatible?
this is my cart
What does unirom report your chip as?

Mine is a CSI CAT28F010N GAMEHUNTER/PSWD

20200724_135037.jpg
this is mine
You do not have the required permissions to view the files attached to this post.

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 25th, 2020, 2:36 am

Haker120 wrote: July 25th, 2020, 12:33 am And this is my Smart Cartridge, I can't flash it anymore unless I'll force generic 128k one (L1 + L2) so I don't remember how it was detected as.

Image
i think the winbond chip is upside down

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 25th, 2020, 6:14 am

How so? It works. ;)

User avatar
Mdv
Active PSXDEV User
Active PSXDEV User
Posts: 69
Joined: Jul 06, 2020
PlayStation Model: SCPH-7502
Location: United Kingdom

Post by Mdv » July 25th, 2020, 6:33 am

Haker120 wrote: July 25th, 2020, 6:14 am How so? It works. ;)
i had a couple with winbond chips and they were the other way round and they flashed fine

User avatar
sickle
Verified
C Programming Expert
C Programming Expert
Posts: 257
Joined: Jul 17, 2013
I am a: Chocolate-fueled pug fetish robot.
Location: Scotland

Post by sickle » July 26th, 2020, 7:52 am

Hi, sorry for the delay - been hard at work.
Thanks for keeping on top of things, Squaresoft, Love yah <3

@ Puppydogpals,
Cheers for the feedback.

The disc issue has been fixed and will be rolling out shortly :D
"Error during SysCNF" etc does suggest it doesn't like the discs you're using though.
Try Verbatim?

So... the chip you posted The "Flash" branded one.
I have one the same, and it can't be flashed without a 12v source.
I think I'm right in saying if you go into caetla with it, for example and try to save settings... it won't save there either.
Essentially, they knew what they were doing and put out cheap carts which couldn't be written to :(


@mdv

Nah, ditching parallel support!

Lol that chip does look upside down, but I think it's just 'cause the voltage regulator's on the 'wrong' side.
Doesn't feel right though.

@Haker120

I've added support for that winbond chip now, thanks ^^
http://www.psxdev.net/forum/viewtopic.p ... 440#p19299

I've also been working on V2 and V3 support, so hopefully that annoying dual-chip cart will be good!
http://www.psxdev.net/forum/viewtopic.p ... 420#p19263

Got Caetla dual-booting on a V2 right now!

User avatar
Puppydogpals
Curious PSXDEV User
Curious PSXDEV User
Posts: 14
Joined: Jul 15, 2020

Post by Puppydogpals » July 26th, 2020, 9:08 am

sickle wrote: July 26th, 2020, 7:52 am Hi, sorry for the delay - been hard at work.
Thanks for keeping on top of things, Squaresoft, Love yah <3

@ Puppydogpals,
Cheers for the feedback.

The disc issue has been fixed and will be rolling out shortly :D
"Error during SysCNF" etc does suggest it doesn't like the discs you're using though.
Try Verbatim?

So... the chip you posted The "Flash" branded one.
I have one the same, and it can't be flashed without a 12v source.
I think I'm right in saying if you go into caetla with it, for example and try to save settings... it won't save there either.
Essentially, they knew what they were doing and put out cheap carts which couldn't be written to :(
I'm using Maxwell cd's burned at 8x got them from tesco reduced to clear 25 for £5 (4.50 with my staff discount) all other games work spot on with and it did boot OK using breaker pro so might of been a bug, saying that my rebuilt ones work fine now. Will retest when update is out and report back.

Yeah if I manually try to add games or codes they don't save. Can a 12v be added somehow to flash, I'm not adverse to some soldering if required. Would that not damage the ps1 if extra power was introduced though?

Thanks for your replies

User avatar
sickle
Verified
C Programming Expert
C Programming Expert
Posts: 257
Joined: Jul 17, 2013
I am a: Chocolate-fueled pug fetish robot.
Location: Scotland

Post by sickle » July 26th, 2020, 9:54 am

Puppydogpals wrote: July 26th, 2020, 9:08 am
sickle wrote: July 26th, 2020, 7:52 am Hi, sorry for the delay - been hard at work.
Thanks for keeping on top of things, Squaresoft, Love yah <3

@ Puppydogpals,
Cheers for the feedback.

The disc issue has been fixed and will be rolling out shortly :D
"Error during SysCNF" etc does suggest it doesn't like the discs you're using though.
Try Verbatim?

So... the chip you posted The "Flash" branded one.
I have one the same, and it can't be flashed without a 12v source.
I think I'm right in saying if you go into caetla with it, for example and try to save settings... it won't save there either.
Essentially, they knew what they were doing and put out cheap carts which couldn't be written to :(
I'm using Maxwell cd's burned at 8x got them from tesco reduced to clear 25 for £5 (4.50 with my staff discount) all other games work spot on with and it did boot OK using breaker pro so might of been a bug, saying that my rebuilt ones work fine now. Will retest when update is out and report back.

Yeah if I manually try to add games or codes they don't save. Can a 12v be added somehow to flash, I'm not adverse to some soldering if required. Would that not damage the ps1 if extra power was introduced though?

Thanks for your replies
Hah, right, perfect... yeah switch from Maxell to Verbatim.
I've even found the Verbatim ones sold in Tesco are way better than the 50x spindles on amazon!

TBH I never looked into it.
The PSX doesn't have the juice for it, but I guess the parallel port would? Might want to ask Dan or Paul on the discord- that's their kinda area.

User avatar
Haker120
Curious PSXDEV User
Curious PSXDEV User
Posts: 27
Joined: Jun 11, 2020
I am a: Gamer
Motto: As long as you enjoy the game

Post by Haker120 » July 27th, 2020, 3:36 am

@sickle Thanks and what should I flash then? :D And to be clear, my GameBuster is only 128k or 256k with no (or yes?) possibility to get UniROM + Caetla? :)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 6 guests