Gameshark v2.1 for homebrew

General homebrew games, programs and PlayStation PS-EXE's
Post Reply
stvincent
Curious PSXDEV User
Curious PSXDEV User
Posts: 12
Joined: Oct 03, 2014

Gameshark v2.1 for homebrew

Post by stvincent » January 24th, 2015, 5:13 am

I found a GS 2.1 at a local pawn shop, but not sure if I can use it for anything.

Can GS 2.1 be used to upload homebrew without the CommsLink ISA card? If not, then what is the issue? Is it a software issue - or truly a hardware problem?

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » January 24th, 2015, 5:55 pm

GameShark requires a commslink such as the DATEL based ISA one, or a FreeWing (homebrew hardware).
It's easier to just use an Xplorer.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

stvincent
Curious PSXDEV User
Curious PSXDEV User
Posts: 12
Joined: Oct 03, 2014

Post by stvincent » May 9th, 2015, 11:55 am

IMG_1303.JPG
So I finally got Xplorer, looks like a V1? And its a PAL, so I get a nice B&W video with static audio noise when its activated :clap

So anyhow, is Xplorer supposed to boot backups?

And also, any regular DB25 Male-Female cable will work to connect it to the PC ?
You do not have the required permissions to view the files attached to this post.

Gradius
Verified
Extreme PSXDEV User
Extreme PSXDEV User
Posts: 220
Joined: Sep 09, 2012
I am a: IT Consultant, Systems Integrator
PlayStation Model: 7501
Location: Chile

Post by Gradius » May 10th, 2015, 5:49 am

With GameShark PRO I always used just a regular Parallel port.

Works fine.

User avatar
Greg
Verified
Serious PSXDEV User
Serious PSXDEV User
Posts: 101
Joined: Sep 09, 2013
PlayStation Model: SCPH-7501
Location: Port-au-Prince, HAITI

Post by Greg » May 10th, 2015, 6:01 am

Gradius wrote:With GameShark PRO I always used just a regular Parallel port.

Works fine.
Yes, but only the GameShark PRO use Parallel port, the regular GameShark use the CommLink interface from Datel.
1 x SCPH-7501, 2 x SCPH-7001, 2 x SCPH-5501
1 x Pro Action Replay with "Dual Rom Mod", ROM 1: Caetla, ROM 2: UNIROM
1 x Xplorer V2 with Caetla
1 x GameShark V2.1
1 x GameShark Pro V3.0
1 x CommLinkUSB
1 x XLinkUSB

Gradius
Verified
Extreme PSXDEV User
Extreme PSXDEV User
Posts: 220
Joined: Sep 09, 2012
I am a: IT Consultant, Systems Integrator
PlayStation Model: 7501
Location: Chile

Post by Gradius » May 10th, 2015, 1:08 pm

Oh right!

I have forgot that... so many years passed (18y), easy to forget.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests