Page 1 of 1
How to connect usb/serial to ps1?
Posted: June 23rd, 2013, 11:59 pm
by bizarro2011
I have a cable usb/Serial.
I can connect to the serial ps1? Work?
someone already used? which software need?
Re: How to connect usb/serial to ps1?
Posted: June 24th, 2013, 5:14 am
by Gradius
You're pretty crazy, not the less.
Re: How to connect usb/serial to ps1?
Posted: June 29th, 2013, 2:41 pm
by LameGuy64
Its possible since the Serial I/O port on the back of the PlayStation is RS-232 compatible but you'll need to build an adapter circuit to convert the voltages and you'll need to replace the proprietary Serial I/O connector on your PSX with a DB-9 connector.
Here's the build instructions for making such an adapter:
http://hitmen.c02.at/html/psx_siocable.html
If you don't wanna build the adapter yourself, you can try finding a NET Yaroze serial link cable which pretty much does the same thing but such cables are very rare and expensive.
The things you can do with such an adapter/cable is pretty limited due to the speed limitations of the serial port. The main uses of such a cable is to upload and run your PSX exectuables on a real system (if you don't have an xPlorer cartridge) and to send debug messages to your PC.
Here's the tool to execute PS-EXE files received from the serial port:
http://hitmen.c02.at/files/releases/psx/hit-serial.zip
Re: How to connect usb/serial to ps1?
Posted: July 2nd, 2013, 3:10 am
by Type 79
ebay - USB To RS232 TTL CH340 Auto Converter Module
Quick test with Putty, PlayStation echoes back nicely.
Code: Select all
/* $PSLibId: Run-time Library Release 4.1$ */
/*
* sio echo back
*
* Copyright (C) 1997 by Sony Corporation
* All rights Reserved
*
* Version Date Design
* ---------------------------------------
* 1.00 Jan.28.1997 shino
*/
#include <sys/types.h>
#include <libetc.h>
#include <libsio.h>
static void sio_read();
main()
{
ResetCallback();
AddSIO(9600);
ResetGraph(0);
PadInit(0);
while(1)
{
if(PadRead(1)&PADselect)break;
sio_read();
}
DelSIO();
PadStop();
ResetGraph(3);
StopCallback();
return;
}
static void sio_read()
{
char c;
c=getchar();
putchar(c);
}
Re: How to connect usb/serial to ps1?
Posted: July 2nd, 2013, 4:29 am
by bizarro2011
yes,
yes, that's what I'm talking about.
this cable here is so fit, I know.
Pin Sinalizar Nome Direção
1 RTS PSX RTS Fora
2 GND PSX GND n / a
3 DTR PSX DTR Fora
4 CTS PSX CTS Em
5 TXD PSX TXD Fora
6 DSR PSX DSR Em
7 3,3 V PSX VCC n / a
8 RXD PSX RXD Em
you have and use? can run homebrew?
Re: How to connect usb/serial to ps1?
Posted: July 2nd, 2013, 2:16 pm
by Gradius
bizarro2011: vc precisa de um conversor TTL, esse que vc tem (apenas RS232 para USB) não serve!
Re: How to connect usb/serial to ps1?
Posted: July 4th, 2013, 7:51 am
by bizarro2011
ok, I'll use this project to run homebrew.
it works?
Re: How to connect usb/serial to ps1?
Posted: July 11th, 2013, 12:08 pm
by Shendo
Your USB-RS232 adapter requires voltage shifter and you will need to loopback all lines except TX and RX.
You also need DB-9 connector, SCPH-1040 cable and a soldering iron to connect everything.
I suggest you go with Type 79's advice.
It's the cheapest option and it works with the send application so you can upload your homebrew.
Re: How to connect usb/serial to ps1?
Posted: July 15th, 2013, 2:53 pm
by Shadow
On a side note, if anyone is having problems compiling Sony's
SIO Echo Back example, it is because you need to edit
PSYQ.INI under
psyq/bin and add the SIO library
You will need to do this if you use
#include <libsio.h> which contains
AddSIO(9600);.
Otherwise, if you don't want to edit the standard libs (all of which are not actually necessary) then you can link it in your MAKEFILE.