problem creating multi-session image exe loader

General PSX CD Troubleshooting, PSX CD-ROM Mastering and Disc Creation
Post Reply
RetroPsx
BANNED
BANNED
Posts: 28
Joined: Dec 27, 2017

problem creating multi-session image exe loader

Post by RetroPsx » January 21st, 2018, 2:16 am

Hello everyone


the software for me to use is: cdgenPS2

Image

I prefer to test it under epsxe 1.7.0 to have no problem under CDR

Image

this program does not run psx exe normally example:

here is bios dumper from shendo is blocking on this

Image

is the x-flash overburn has this bug has it

Image

but after my touch the menu appears

Image

and for psxserial it makes this mistake

Image

is there a solution to this problem

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » January 21st, 2018, 11:43 am

Don't use X-Flash overburn and an emulator. Try it on the real hardware.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

RetroPsx
BANNED
BANNED
Posts: 28
Joined: Dec 27, 2017

Post by RetroPsx » January 22nd, 2018, 2:01 am

under Real hardware it works I extracted it from a CDR that works perfectly under the psx

and it works that way too

Image

Image

and shendo dumper BIOS also works this way

Image

apart psx serial

Image

I think that SERIAL.EXE which is psx serial needs the file SERIAL.PAD to execute?

is there another way to make this image bug-free?

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » January 22nd, 2018, 10:59 am

SERIAL.EXE (PSXSERIAL) won't work under emulation.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

RetroPsx
BANNED
BANNED
Posts: 28
Joined: Dec 27, 2017

Post by RetroPsx » January 22nd, 2018, 11:31 pm

is there any solution to these bug ? for other psx exe ? for the bootable image ?

and these psx exe that I show you from my last post are not run from the image of cdgenPS2

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests