How to Convert A PS1 EXE To PS2 POPS Compatible SLUS file.

General help for the PSY-Q SDK, such as setting the SDK up, compiling correctly, linking and debugging
Post Reply
Kazancik
What is PSXDEV?
What is PSXDEV?
Posts: 2
Joined: Dec 23, 2022

How to Convert A PS1 EXE To PS2 POPS Compatible SLUS file.

Post by Kazancik » February 16th, 2023, 2:07 am

I need help about converting a Ps1 exe compiled with Psy-Q to Ps2 POPS compatible SLUS_XX.XX file.

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » February 17th, 2023, 1:13 am

Kazancik wrote: February 16th, 2023, 2:07 am I need help about converting a Ps1 exe compiled with Psy-Q to Ps2 POPS compatible SLUS_XX.XX file.
These are the PSXDEV forums. They were specifically setup since 2012 for the PS1. For that, you'll need to find a "PS2DEV" forum to find someone who knows PS2 development.

I'm not sure why you'd want to convert a PS1 EXE to PS2 "POPS" format though. The PS2 should be able to boot a PS1 EXE, but then again, I'm not a PS2 programmer so I wouldn't have a clue as I've never tried. Again, these are PS1 forums :roll:
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

Kazancik
What is PSXDEV?
What is PSXDEV?
Posts: 2
Joined: Dec 23, 2022

Post by Kazancik » February 17th, 2023, 1:15 am

Shadow wrote: February 17th, 2023, 1:13 am
Kazancik wrote: February 16th, 2023, 2:07 am I need help about converting a Ps1 exe compiled with Psy-Q to Ps2 POPS compatible SLUS_XX.XX file.
These are the PSXDEV forums. They were specifically setup since 2012 for the PS1. For that, you'll need to find a "PS2DEV" forum to find someone who knows PS2 development.

I'm not sure why you'd want to convert a PS1 EXE to PS2 "POPS" format though. The PS2 should be able to boot a PS1 EXE, but then again, I'm not a PS2 programmer so I wouldn't have a clue as I've never tried. Again, these are PS1 forums :roll:
Oh thanks.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests