Page 1 of 1
scph-9000 ntsc-j + mmc3
Posted: August 15th, 2014, 3:14 pm
by marts
Hi, guys.
I just bought ps scph-9000 directly from Japan, and install chip mmc3 in it, but due of cuted Japanese bios it boot only Japanese backups.. Is it possible to use some bootcd to load another region games?
Re: scph-9000 ntsc-j + mmc3
Posted: August 15th, 2014, 8:29 pm
by Administrator
You need to either patch the images, swap the BIOS ROM or use CAETLA.
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 5:57 pm
by marts
I would like to play original license games.. so there is only one way: replace bios. i c, thank you!
i have broken scph-1002, does bios rom chip compatible with scph-9000?
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 6:26 pm
by Administrator
Yes, you can use a 1002 BIOS on a 9000. I hope you have good soldering skill though.
I reckon you're rather off buying a new laser for the 1002 and putting the MM3 in that instead of the 9000.
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 7:54 pm
by marts
1002 is completely dead
CXD8561Q have black spot on it..
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 7:58 pm
by marts
Could you help me and show what of this chip is bios chip?
https://www.dropbox.com/s/22xii7whrc5i3 ... .57.27.jpg
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 8:29 pm
by marts
Re: scph-9000 ntsc-j + mmc3
Posted: August 16th, 2014, 11:27 pm
by Administrator
You're welcome
