PlayStation Development Network

Hay, i have buy some cd-drivers and have some problem whit the seller, according to him you can´t use other drivers that the one that was in your playstation from the start.

Whit other words you need the same model on the one you replace, i do have this. But it case you don´t have im pretty sure you can in theory use any of those driver models in any playstation. Espect from that some connection cables are to long or to small, and the driver maybe not fit perfect.

But its nothing other that don´t make this working right? As the seller try to convince me that this is not the case. Here comes the original massage.
\Whiskey

Generally best to get the right laser, like he says.
You might have some luck with a different one... I have a later laser working in an SCPH1002 model for example, but it required cutting into the plastic to fit properly 'cause of the subtle difference in shape.

sicklebrick wrote:I have a later laser working in an SCPH1002 model for example, but it required cutting into the plastic to fit properly 'cause of the subtle difference in shape.

+1

sicklebrick wrote: Generally best to get the right laser, like he says.
You might have some luck with a different one... I have a later laser working in an SCPH1002 model for example, but it required cutting into the plastic to fit properly 'cause of the subtle difference in shape.

Well my point was that it should work whit any laser, on any playstation as long you don´t have the top on it, as it will get you problem whit how it fits as you say. Or is it more stuff that can make it not working whit the other lasers more then the way its fits?

\ Whiskey

As far as i know all laser units compatible with every psx units. but some lasers don't fit into certain cases or the cable won't reach. i tried a KSM-440BAM (found in scph-10x units) with my fat scph-7502 psx and the only problem i encountered was the length of the ribbon cable.

Killer_Code wrote: As far as i know all laser units compatible with every psx units. but some lasers don't fit into certain cases or the cable won't reach. i tried a KSM-440BAM (found in scph-10x units) with my fat scph-7502 psx and the only problem i encountered was the length of the ribbon cable.

That was exactly what i did try to confirm.

\ Lukasz

I would just ask him for a refund.