PlayStation PAL Series Colour/Color Modification (PAL60)

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
User avatar
LameGuy64
Verified
Psy-Q Enthusiast
Psy-Q Enthusiast
Posts: 388
Joined: Apr 10, 2013
I am a: Hobbyist Game Developer
Motto: Commercial or not, play it!
PlayStation Model: H2000/7000
Location: Philippines
Contact:

Post by LameGuy64 » June 26th, 2018, 5:28 pm

I was able to mod a 7000 and 7501 PlayStation to display correct colors in PAL mode without having to do an oscillator mod. You basically do the same mod shown in the first post of this thread but instead of connecting the indicated via to ground you connect it to 3.5v which you can find a pad of near the power connector on the mainboard.

This will make the console produce a weird NTSC50 signal when running in PAL mode which multi-standard CRT TVs can accept without issue but LCD TVs and video capture cards tend to not like very much so modding a PAL unit to output NTSC as PAL60 is better in the long run as PAL60 is supported better.
Please don't forget to include my name if you share my work around. Credit where it is due.

Dev. Console: SCPH-7000 with SCPH-7501 ROM, MM3, PAL color fix, Direct AV ports, DB-9 port for Serial I/O, and a Xplorer FX with Caetla 0.35.

DTL-H2000 PC: Dell Optiplex GX110, Windows 98SE & Windows XP, Pentium III 933MHz, 384MB SDRAM, ATI Radeon 7000 VE 64MB, Soundblaster Audigy, 40GB Seagate HDD, Hitachi Lite-on CD-RW Drive, ZIP 250 and 3.5" Floppy.

Stepik
What is PSXDEV?
What is PSXDEV?
Posts: 1
Joined: Oct 24, 2018

Post by Stepik » October 24th, 2018, 8:42 pm

Hi! I found a right scheme for color mod scph-1002
https://shema.info/en/television-and-vi ... blems.html
Image
Image

VT1 = BC547B
You do not have the required permissions to view the files attached to this post.

Nextria
Curious PSXDEV User
Curious PSXDEV User
Posts: 17
Joined: Mar 10, 2019

Post by Nextria » April 16th, 2019, 11:24 pm

Shadow wrote: July 31st, 2014, 7:56 pm Image

You don't have to use a crystal oscillator if you know how to build a simple XTAL based oscillator, but a sealed oscillator will always provide a much more accurate running clock :)

The 'QXO-1100' must be 5V TTL or CMOS. The frequency you need is 4.433MHz as mentioned in the first post :P
Hello

I know this is a older theath but i have been modding some old PSX with the PSNee modchip.
I have the problem now the older models give black an white picture with ntsc games.

Are there any alternatives for the QXO-1100, on a site like aliexpess that you know ?
I want to sell the modded PSX, so i want a permanate fix

rama3
Verified
/// PSXDEV | ELITE ///
/// PSXDEV | ELITE ///
Posts: 510
Joined: Apr 16, 2017

Post by rama3 » April 17th, 2019, 2:02 am

Well, as I warned in the other thread:
This mod will give you color, but it will look very bad. Moving dot crawl all over the screen bad.
If you want to sell the console, it's better to just include an RGB cable.

As far as I know, these mods aren't being made anymore. You'd have to build it yourself, possibly using a guide for a different console (same principle of supplying an external NTSC color carrier clock).
Here is a guide for Mega Drive, for example: https://assemblergames.com/threads/mod- ... tal.49686/

But honestly, it's not worth the trouble with a simple mod like this.
A better mod would somehow synchronize the carrier clock with the system, or simply replace the PAL main oscillator with an NTSC one.

Nextria
Curious PSXDEV User
Curious PSXDEV User
Posts: 17
Joined: Mar 10, 2019

Post by Nextria » April 17th, 2019, 3:51 am

rama3 wrote: April 17th, 2019, 2:02 am Well, as I warned in the other thread:
This mod will give you color, but it will look very bad. Moving dot crawl all over the screen bad.
If you want to sell the console, it's better to just include an RGB cable.

As far as I know, these mods aren't being made anymore. You'd have to build it yourself, possibly using a guide for a different console (same principle of supplying an external NTSC color carrier clock).
Here is a guide for Mega Drive, for example: https://assemblergames.com/threads/mod- ... tal.49686/

But honestly, it's not worth the trouble with a simple mod like this.
A better mod would somehow synchronize the carrier clock with the system, or simply replace the PAL main oscillator with an NTSC one.
Hey Rama3

Yeah you right. I just ordered some RGB scart cables from AliExpress
But they still give black and white image.

How do I know I order the right cables or can I modify the ones I got ?

rama3
Verified
/// PSXDEV | ELITE ///
/// PSXDEV | ELITE ///
Posts: 510
Joined: Apr 16, 2017

Post by rama3 » April 18th, 2019, 1:39 am

Is the picture also noisy and unsharp?
If so, the TV probably expects a signal that the cable doesn't provide (RGB switch signal).
This is rare, even with cheap cables, so idk.

User avatar
alimadhi
Active PSXDEV User
Active PSXDEV User
Posts: 56
Joined: Aug 07, 2013
PlayStation Model: DTL-H1101
Location: From the Hell

Post by alimadhi » May 29th, 2019, 8:25 am

I have 7500 NTSC-J
today arrived PSIO and every thing ok only PAL Games showing with no color!
any help?
Fmicome (*3) Nintendo NES (*8) MegaDrive (*6) MegaDrive II (*7) Dreamcast (*4)
PlayStation : SCPH-5000, SCPH-5502, SCPH-7000, SCPH-7502 (*5), SCPH-9000, SCPH-9002 (*6)
PlayStation 2 : SCPH-50000 (*4), SCPH-50004 (*2), SCPH-70000(*2), SCPH-70004, SCPH-77004
PlayStation 3 : CECH-2004B, CECH2012B, CECH-2512B, CECH-2503A

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » May 29th, 2019, 2:33 pm

Lift pin 157 on the GPU and tie the pad as seen in the 7502 photo high to Vcc (3.50V) instead of Gnd (0V).
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

User avatar
alimadhi
Active PSXDEV User
Active PSXDEV User
Posts: 56
Joined: Aug 07, 2013
PlayStation Model: DTL-H1101
Location: From the Hell

Post by alimadhi » May 29th, 2019, 10:30 pm

Shadow wrote: May 29th, 2019, 2:33 pm Lift pin 157 on the GPU and tie the pad as seen in the 7502 photo high to Vcc (3.50V) instead of Gnd (0V).
hmmm, i have tie the pad to GND and give me only sound, will try to to vcc 3.50V
thanks
Fmicome (*3) Nintendo NES (*8) MegaDrive (*6) MegaDrive II (*7) Dreamcast (*4)
PlayStation : SCPH-5000, SCPH-5502, SCPH-7000, SCPH-7502 (*5), SCPH-9000, SCPH-9002 (*6)
PlayStation 2 : SCPH-50000 (*4), SCPH-50004 (*2), SCPH-70000(*2), SCPH-70004, SCPH-77004
PlayStation 3 : CECH-2004B, CECH2012B, CECH-2512B, CECH-2503A

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » May 30th, 2019, 2:21 am

GND is for PAL consoles.
VCC is for NTSC consoles.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

bugmenot
Interested PSXDEV User
Interested PSXDEV User
Posts: 6
Joined: Oct 17, 2019

Post by bugmenot » May 8th, 2020, 12:03 am

Hi there !

For the SCPH-7502, there seems to be an alternative way of doing this :

Image
Source : https://github.com/Kippykip/PSX-Modchip ... native.jpg

EDIT : After checking the traces on my PU-22, it seems fine for a PAL SCPH-7502.
Here is the other side of the board with the contact points circled :
Image

wanderer
Interested PSXDEV User
Interested PSXDEV User
Posts: 7
Joined: Apr 01, 2018

Post by wanderer » July 17th, 2020, 6:49 pm

Shadow wrote: July 31st, 2014, 7:56 pm Image

You don't have to use a crystal oscillator if you know how to build a simple XTAL based oscillator, but a sealed oscillator will always provide a much more accurate running clock :)

The 'QXO-1100' must be 5V TTL or CMOS. The frequency you need is 4.433MHz as mentioned in the first post :P
Can someone tell me if you can do this PAL60 mod on the PU-8 with the QXO-1100 alongside the reference oscillator mod for PU-8 :
ady05113 wrote: January 8th, 2015, 3:46 am
Image
I already did the the double oscillator mod and I would also like PAL colors with NTSC games when using composite or s-video.

a7mag3ddon
Curious PSXDEV User
Curious PSXDEV User
Posts: 20
Joined: Aug 26, 2020

Post by a7mag3ddon » August 26th, 2020, 9:06 pm

Hello, looking for some help on b&w on ntsc games on a PAL 5502 machine.

I have tried a working RGB cable (checked inside scart and has 180ohm resistor and 3 caps on R, B,G signals) but my tv shows b and w pic and flashing screen.

I tried my Megadrive RGB machine, and my Saturn RGB cabled machine and they both display perfectly.

If i use the PS1 RGB cable into an upscaler for HDMI output it detects it as an RGB signal so i know the cable and ps1 are working ok ish...

Is there any way i can fix this or do i need to buy say a 7xxx series machine for better results?

Any help apreciated.

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » August 27th, 2020, 4:54 pm

For a 5502, you need an external crystal oscillator.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

a7mag3ddon
Curious PSXDEV User
Curious PSXDEV User
Posts: 20
Joined: Aug 26, 2020

Post by a7mag3ddon » August 27th, 2020, 7:34 pm

Hi, i have tried finding a 4.443 oscillator but seems they dont make them any more, certainly not available from the shops ive been looking at in UK, RS, digikey, amazon, ebay.

Do they still make them? Is there an easy alternative.

a7mag3ddon
Curious PSXDEV User
Curious PSXDEV User
Posts: 20
Joined: Aug 26, 2020

Post by a7mag3ddon » August 27th, 2020, 7:49 pm

Bit of an update, ive tried this 5502 ps1 on 3 different TV's using 3 different RGB enabled cables and still plays in black and white, does the 5502 not have RGB functionality? or is it faulty?

User avatar
Shadow
Verified
Admin / PSXDEV
Admin / PSXDEV
Posts: 2670
Joined: Dec 31, 2012
PlayStation Model: H2000/5502
Discord: Shadow^PSXDEV

Post by Shadow » August 28th, 2020, 7:48 pm

Could be faulty, especially if someone has worked on it before.
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.

PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.

a7mag3ddon
Curious PSXDEV User
Curious PSXDEV User
Posts: 20
Joined: Aug 26, 2020

Post by a7mag3ddon » September 2nd, 2020, 10:40 am

Ok, more updates. I borrowed a friends 9000 model ps1 and it booted straight into a usa game in colour using my cables and my tv.

Whilst my ps1 isnt technically faulty as it plays PAL games play perfectly over the RGB cable on this pal machine.

So no idea why it doesnt work for Japanese and American games and dont know how to start testing the machine either.

User avatar
TriMesh
Verified
PSX Aptitude
PSX Aptitude
Posts: 225
Joined: Dec 20, 2013
PlayStation Model: DTL-H1202
Location: Hong Kong

Post by TriMesh » September 3rd, 2020, 4:34 pm

a7mag3ddon wrote: September 2nd, 2020, 10:40 am Ok, more updates. I borrowed a friends 9000 model ps1 and it booted straight into a usa game in colour using my cables and my tv.

Whilst my ps1 isnt technically faulty as it plays PAL games play perfectly over the RGB cable on this pal machine.

So no idea why it doesnt work for Japanese and American games and dont know how to start testing the machine either.
The later model PAL machines (SCPH-7002, SCPH-7502 and SCPH-9002) will produce NTSC-4.43 when running NTSC software. This was the output format typically used by multi-standard VCRs when playing back NTSC tapes, so a lot of Euro spec TVs can handle it.

I suspect your TV is not using the RGB signals for some reason and the the SCPH-9002 is working in color because it's generating a composite format that the TV can handle.

a7mag3ddon
Curious PSXDEV User
Curious PSXDEV User
Posts: 20
Joined: Aug 26, 2020

Post by a7mag3ddon » September 4th, 2020, 1:25 am

Thats what i dont get, my TV definitly supports RGB my Saturn RGB cable works, my Amstrad 6128 RGB cable works and my Megadrive RGB cable works.

It has a very old non stealth modchip installed, would that matter?

Is there any signals i can check? I know the voltage to pin 16 is there i checked that.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests