Page 1 of 1
PsOne Ntsc-us version/spch 101/pm-41 board
Posted: December 22nd, 2012, 6:27 pm
by jfar223344
Hello everyone! Do you have any diagram/pic how to install this kind of mod chip pic 12C508/p which i got from a defective ps-one spch-103 made in china for asia.I want to use this chip on working spch-101, don't know what kind of hex prog they used in it but uses pin 1(green), pin 2(black), pin 4 (white), pin 6(red), and pin 8(yellow).
Re: PsOne Ntsc-us version/spch 101/pm-41 board
Posted: December 22nd, 2012, 6:32 pm
by Administrator
Try matching the pins here:
http://psxdev.net/forum/viewtopic.php?f=49&t=111
(IE: Download the .ZIP that matches your model number (SCPH-xxxx))
Re: PsOne Ntsc-us version/spch 101/pm-41 board
Posted: December 22nd, 2012, 7:51 pm
by jfar223344
Thanks! Shadow i will try this one if it works or not. By the way whats the purpose of the two red mark without number indicated between number 8 to adaptor?
Re: PsOne Ntsc-us version/spch 101/pm-41 board
Posted: December 22nd, 2012, 8:15 pm
by Administrator
jfar223344 wrote:By the way whats the purpose of the two red mark without number indicated between number 8 to adaptor?
I'm sorry. What do you mean?
Your PSone is a 103. So, you need to download the MULTIMODE (SCPH-10x (PSone)) .ZIP:
http://psxdev.net/downloads/modchip_ins ... PH-10x.zip
Re: PsOne Ntsc-us version/spch 101/pm-41 board
Posted: December 22nd, 2012, 9:08 pm
by jfar223344
I mean the 6 wire installation on the pic. Never mind i got it already. My ps-one 103 ntsc already broke so i took the chip and want to transfer it to ps one 101 ntsc . I would work this one as long i have spare time. I will let you know guys!
ps.
http://www.eymelectronica.com/playchips/Frame_left.htm is this working too?