Help with SCPH-1001

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
Godzilla16
What is PSXDEV?
What is PSXDEV?
Posts: 1
Joined: January 30th, 2018, 11:43 pm

Help with SCPH-1001

Post by Godzilla16 » February 1st, 2018, 4:26 am

I have a SCPH-1001 and i installed a mm3 i don't know if the points are wrong or what could not find a pic on how to install on this modle the disc will not read burn disc even with chip installed help it only reads real ps1 gamesi tested it with burn music disc and burn game disk with chip and it will not read if
You do not have the required permissions to view the files attached to this post.

allanjmar
Interested PSXDEV User
Interested PSXDEV User
Posts: 7
Joined: November 27th, 2014, 7:21 am

Re: Help with SCPH-1001

Post by allanjmar » February 1st, 2018, 3:00 pm

I would recommend the classic wiring first just to check if that modchip is working properly.
You do not have the required permissions to view the files attached to this post.

Dragonsfire666
Interested PSXDEV User
Interested PSXDEV User
Posts: 6
Joined: February 25th, 2018, 12:39 pm

Re: Help with SCPH-1001

Post by Dragonsfire666 » March 9th, 2018, 11:53 am

I have a 1001 chiped and the pic that allenmjar put up is how i installed mine.
Yours dosnt look right i thonk i had a 900x that was wired like that years ago cant remeber

But i think the 4 wire install is just for backups and not region
For pal/region it involves lifting a pin or two and a whole lot of other things to get pal games to work
Was too much for me i tried so i can play darstalkers 3 Europe version was the only one i could find
And decided it was ro much

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest