Resetting the BIAS AND GAIN POTS on the PU-7/PU-8-11 board.

General information to do with the PlayStation 1 Hardware. Including modchips, pinouts, rare or obscure development equipment, etc.
Post Reply
StevieGoodwin
Curious PSXDEV User
Curious PSXDEV User
Posts: 33
Joined: May 02, 2017

Resetting the BIAS AND GAIN POTS on the PU-7/PU-8-11 board.

Post by StevieGoodwin » October 26th, 2017, 8:41 am

Hi all, I have an SCPH-1001 from August 1995 that i accidentally touched the BIAS AND GAIN pots on. It's the one with the pots from a PU-7 which can be confusing. Here is a picture on what i mean on those type of pots:
POT (VA2).PNG

This is the POT of a later SCPH-1001 which is so easy to work on:
focus_bias_2.jpg
What does the green mean? What does the yellow mean? What does the red mean?


Does anyone know the original position where i can reset the older pot on the first picture back to. If you got a picture and mark it with a color. I would apperciate it, because it is working very poorly with very rough skipping.
You do not have the required permissions to view the files attached to this post.

StevieGoodwin
Curious PSXDEV User
Curious PSXDEV User
Posts: 33
Joined: May 02, 2017

Post by StevieGoodwin » October 26th, 2017, 9:26 am

Anyone?

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests