PlayStation Development Network

I have usb to uart-ttl modüle CP2102 can ı connected with memory card or psx controller ?
http://www.ebay.com/itm/CP2102-USB-2-0- ... 0683943875

You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.

LameGuy64 wrote:You can connect it to the Serial I/O port of the PSX but I don't think you can use it with a controller or memory card as they use an SPI-style protocol and is not compatible with the serial UART protocol.

Thanks For Helping LameGuy64
How Can I Connected Serial I/O port to psx ?
only 3 wire rx tx and gnd work ?
or ı need connect more cable ?

Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).

LameGuy64 wrote:Connecting Tx, Rx and Gnd should be enough for serial communications without handshaking... Just make sure that the Tx and Rx lines are swapped between devices (ie. Tx goes to Rx and Rx goes to Tx).

thnx again