PlayStation Development Network

I have 1 broken 3 working both revision 9002 console ı have my 2nd console some problem.
My Scph-9002 Console Vibration Not Work But if ı put my Gamepad My Another Console vibration is work
ı change controller flexi cable And Gamepad Socked but not working this way
How Can ı fix this problem ?

Check the fuse on the mainboard. It's most likely blown.

I Search Blowing Fuses My Card with My multimeter see 1 (20 number) fuses is broken

after ı get this (20 number) new fuses my old Broken psx board now vibration it work
and after ı bypass my old psx board little cable
Thank Shadow You Are Best !!!

No problem, but do not bypass it. You should really replace that fuse because the next thing that will fry is your CPU if a short or current draw overload happens.

Shadow wrote:No problem, but do not bypass it. You should really replace that fuse because the next thing that will fry is your CPU if a short or current draw overload happens.

Hey Bro ı solder this fuse 00,1 mm diameter 1mm Cooper cable, This Cable resistance is 0.0172 Ω
ı look 20 number smd fuses Amperage is :0,75 A - 3,15 A and 24-72v
this Cable appropriate cable or not ?

Don't use a cable as a fuse. Use a real surface mount fuse like the original.

ok bro ı need try search this fuse
Thanks

I am really looking for those fuses aswell. To be exact :


PS605 - 600mA fuse supplies 3.3V to controller ports.
S! PS605 1-576-259-21 LINK, IC 0.6A

PS602 - 800mA fuse supplies 8V to DualShock motors.
S! PS602 1-576-123-21 LINK, IC 0.8A

a DAMN PRO-TIP!!
Ordered a fuse and it STILL didn't worked? BEWARE THE BIOS DOES DISABLE CONTROLLER when ANALOG *IS* enabled <!>
I was going there to ask for help when I realized this damn fact!
Holy cow I have to solder the fuse back in >.<