Hello there
I was working with a 7502 with the issue of "motor gripping" (velocity changing on the motor creare reading issue) and I've solved that with WD-40.
But, after 5-6 days, the problem persist again.
Is the WD-40 evaporate quickly or the motor is gone?
Here's a video as reference
https://youtu.be/EYDBfWruw_c
Thank you in advance, guys and gurls ^^!
PlayStation Motor Spindle Gripping (RF-300A Mabuchi)
-
~PSXLoVeR95~ Verified
- Active PSXDEV User
- Posts: 73
- Joined: Sep 18, 2016
- I am a: Huge lover of PS1
PlayStation Motor Spindle Gripping (RF-300A Mabuchi)
~ My PS Collection ~
4x SCPH-1000
2x SCPH-1001
7x SCPH-1002
1x SCPH-3000
1x SCPH-3500
1x SCPH-5000
1x SCPH-5501
1x SCPH-5502
2x SCPH-7000
2x SCPH-7002
1x SCPH-7500
1x SCPH-7501
2x SCPH-9000
1x SCPH-9002
3x SCPH-102
>>IT'S A SONY
4x SCPH-1000
2x SCPH-1001
7x SCPH-1002
1x SCPH-3000
1x SCPH-3500
1x SCPH-5000
1x SCPH-5501
1x SCPH-5502
2x SCPH-7000
2x SCPH-7002
1x SCPH-7500
1x SCPH-7501
2x SCPH-9000
1x SCPH-9002
3x SCPH-102
>>IT'S A SONY
-
Shadow Verified
- Admin / PSXDEV
- Posts: 2670
- Joined: Dec 31, 2012
- PlayStation Model: H2000/5502
- Discord: Shadow^PSXDEV
Use clock oil on the motors. If it still doesn't come back, replace the motor with another. They are only generic 6 Volt DC CD-ROM motors so they are readily available
Development Console: SCPH-5502 with 8MB RAM, MM3 Modchip, PAL 60 Colour Modification (for NTSC), PSIO Switch Board, DB-9 breakout headers for both RGB and Serial output and an Xplorer with CAETLA 0.34.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
PlayStation Development PC: Windows 98 SE, Pentium 3 at 400MHz, 128MB SDRAM, DTL-H2000, DTL-H2010, DTL-H201A, DTL-S2020 (with 4GB SCSI-2 HDD), 21" Sony G420, CD-R burner, 3.25" and 5.25" Floppy Diskette Drives, ZIP 100 Diskette Drive and an IBM Model M keyboard.
Who is online
Users browsing this forum: No registered users and 15 guests