New KSM-440BAM requires service?
Posted: June 10th, 2020, 10:47 am
I recently acquired a USA-made REVISION C SCPH-1001. Inside I found a modchip, and, a likely stock KSM-440ACM.
Some FMVs were skipping, a notable one being BLASTO's intro sequence. MORTAL KOMBAT MYTHOLOGIES would only get to the black PLAYSTATION-logo screen. MK MYTHOLOGIES WOULD work 10/10 times by flipping the console upside down. EXTREME GAMES, however, worked fine.
So I ordered a KDM-440BAM from TOTALCONSOLE. I thought that for older PSX models adjustments were require, namely, to the potentiometer. But the electronics shop I planned to have service my console have worked on PSXs in the past. They questioned if any adjustments were needed, and suggested that I plug the lens in, and see what happens.
Sure enough, it worked, booting CRASH BANIDCOOT up on my first try. BLASTO no longer skips. However, MORTAL KOMBAT MYTHOLOGIES, still refuses to load, going to the BIOS screen, instead of locking on the black PSX-logo screen. A few other games also went to the BIOS. However turning the console upside down again makes the games work, MK mythologies included. Note that when it boots to BIOS, the disk is not spinning.
Does it sound like lens-related services are needed to get the console function properly? (A console that I need to turn upside down to get working properly I do not view as functioning properly).
Could the modchip be effecting performance? I am not sure which one it is, but it does seem old and I want to remove it. BIOHAZARD 3 can detect it and shutdown the game. Meanwhile, SPYRO 1, which I thought had copy protection, does not detect it.
Some FMVs were skipping, a notable one being BLASTO's intro sequence. MORTAL KOMBAT MYTHOLOGIES would only get to the black PLAYSTATION-logo screen. MK MYTHOLOGIES WOULD work 10/10 times by flipping the console upside down. EXTREME GAMES, however, worked fine.
So I ordered a KDM-440BAM from TOTALCONSOLE. I thought that for older PSX models adjustments were require, namely, to the potentiometer. But the electronics shop I planned to have service my console have worked on PSXs in the past. They questioned if any adjustments were needed, and suggested that I plug the lens in, and see what happens.
Sure enough, it worked, booting CRASH BANIDCOOT up on my first try. BLASTO no longer skips. However, MORTAL KOMBAT MYTHOLOGIES, still refuses to load, going to the BIOS screen, instead of locking on the black PSX-logo screen. A few other games also went to the BIOS. However turning the console upside down again makes the games work, MK mythologies included. Note that when it boots to BIOS, the disk is not spinning.
Does it sound like lens-related services are needed to get the console function properly? (A console that I need to turn upside down to get working properly I do not view as functioning properly).
Could the modchip be effecting performance? I am not sure which one it is, but it does seem old and I want to remove it. BIOHAZARD 3 can detect it and shutdown the game. Meanwhile, SPYRO 1, which I thought had copy protection, does not detect it.