Yes that's the 7. I didn't make the MM3, I bought it from ebay, so maybe there's different things. The most important thing is that it's working now.

So I tested the mod with a screen to see if the game boots, and yes, it does. And when the CD is accessed, the LED changes color. So absolutely working.

Solved. Soldered the last wire on pin 7, and the LED work. I don't have a screen available for know for being SURE that it works, but the cd spins, and seems to play.

My led has the "+" on the middle leg. The other 2 are probably "-". This is a red/blue led. I tried your thing and it didn't work. The red is wired at the place of the power LED.

What can I do now ?

No, for the cd unit it is ok, I just didn't push the lid button, I'm a fagot I know.

And for the voltage drop, I don't have ANYTHING about the led, that's an led that I salvaged from an old pc mouse. How can I "sink" the current ?

I solved my problem lol.

Ok thanks but know I have problems with the cd unit. No power comes from it and the motor doesn't spin at all.

Hello again there. So I just opened my ps1 scph-1002 for the led, and when I get it back together, the CD unit doesn't work AT ALL ! IT WORKED 10 MINUTES AGO! I have video and audio. Just the CD unit. It is the PsOne's, because you know, fmv skipping. SEND HELP PLZ ! Thanks EDIT : tested with anothe...

Oh sorry, it is not an rgb led, it is bicolor (RED/BLUE for me it seems). Something like this https://www.iascaled.com/blog/driving-3-pin-bicolor-leds-with-mrservo/ For the video it is this at 19:25 https://www.youtube.com/watch?v=hT5NSWS-znc If I solder the last pin of the LED on pin 2 of MM3, will...

I don't think you need any resistor for that, just put the 3rd LED leg and it's done, I've seen a video doing it, but not on my model.

Hello there, My PS1 is a SCPH-1002 PU-8 board chipped. I modded the LED with an RGB one, with 3 legs on it. For now, it is only red color since the last leg is not connected to anything. I want to know where I can solder the third led to have a CD activity thing. Like when the disc is accessed, the ...

Yes, all the drivers have been installed. But still fatal error...

What drivers ?

So what's the point with my fatal error ?

Hello there, maybe Orion could respond to me. From this tutorial : http://onorisoft.free.fr/retro.htm?psx/tutorial/tuto.htm I attempted to flash the Xplorer FX with catela037 (just like it says on the tutorial), but when I press X to flash, nothing happens and I'm stuck. I don't want to just reset t...

Ok, I changed config because the BIOS just freezed, and my win98se was kinda corrupted.
So, Fresh install of Win98SE, specs :

AMD 1.15GHz (as I searched)
512MB of RAM
64MB VRAM video card

When I launch NO$PSX it shows FATAL - Unexpected error

Any help ?

It says it all. I want to know if there is a version of NO$PSX that could work on Win98SE with 800MHz Celeron and 180MB of RAM.

Or any psx emuator with TTY output on this kind of platform.
Thanks.

Hello everyone, I'm building a real ps1 development environment with real old hardware. I run PSYQ on a Intel Celeron 800MHz with 180MB of RAM with Windows 98 SE. I can compile without any problem, but I wondered how to have a TTY output. I know that you can have it with NO$PSX (like in this video :...

Wait nevermind, clean install of windows 98 SE and reinstalling psyq now works. Yay.