The PSone serial internal is 3.3v I believe. The whole MAX232 or other voltage convertion method is done purely on the assumption your going to connect to a true RS232 computer connector. If you going to use a PC or laptop that doesnt come with a serial port then you may just buy a USB serial conver...

Davide_G wrote:I have found this thread: https://assemblergames.com/threads/wtb- ... ost-899454

Hmm, did he know the online disk is now released? and would he mind taking pictures/make a rom dump if posible? I should ask him I gues

First a ROM dump and then PCB pictures of both sides would be awesome

and what ROMprod how to use it? is it a good idea to waste a CDR? or epsxe ca will suffice? Short answer, no good idea to waste a CDR. ROMprod is if I understand it correctly, made to convert a PS-EXE to a rom file for your Gamehunter. So you can run a EXE from the card instead from CD or serial ca...

for most PSOne: http://www.psxdev.net/forum/viewtopic.php?f=62&t=365 others I dont know for sure, but pretty similiar. find the pins, or use the SIO connector. I dint use a Max232 converter, cause I used my USB serial adapter in 3.3v mode, RX, TX and gnd where enough. You might want those other ...

/m-ses-cd/docs/multisession cd.html

... Wow where did you post screenshots or something :O ... http://www.psxdev.net/forum/viewtopic.php?f=55&t=152&p=13419#p13419 but lets keep this thread ontopic :P we havent got a rootfs yet (sources gone(?) and I havent been succesfull yet in getting the kernel to like my attempts at a fs....

I see, again why you asked for a rom to exe program. but now we know wich (and what type) rom. You want to start Caetla or alike just like a normal PS-EXE. Short answer for what I know sofar, no, not posible. Unless: 1, a PS-EXE equivelent cheat entering program already excists 2. someone could make...

coowl I wonde if there are easier ways to make it dialup with like a raspberrypi or something

Aw, I see you have asked multiple times on this forum about these kind of questions. I dont know why, but ive searched arround a bit. http://darius-saturn.com/forum/viewtopic.php?f=305&t=5981#p166448 So your gamehunter seems to have 1Mbit of rom space by default, that is why you only flashed Uni...

What is the point of this post. You want a tool to convert a ROM file to a PS-EXE? yes if I understand you correctly, you have a "cheatdevice" and want to put a rom file on it, and you believe you need to make it into a PS-EXE to do so? This Romfile is "firmware' for the cheatdevice....

EXEs up to 112 KB are supporte

So you have a ROM? what kind, what does it do? did you write pure assembler? or is it caetla or ActionReplay rom of some kind?

You mean you have trouble getting Action replay cheat codes to work a caetla card? I never tried those codes but is there maybe some gameshark <> actionreplay conversion required? actualy, dont think so, after I read: https://gaming.stackexchange.com/questions/76858/how-do-gameshark-codes-work ... I...

trow away all these 3d ideas for now. put em in a freezer if you will. Can you program in C or Cpp ? there is a section with examples: http://www.psxdev.net/forum/viewforum.php?f=40 you should check some out, and setup a dev system with tools and compile a few examples. [EDIT] I dont want to seem li...

I agree, tho I might try the memorycard way first. there is multicard support if I can make 1 card work (I think ext2 is fine for the test, if I have a choise). Including a initramfs with the kernel would be even smart, make it run and see for availeble storage devices later is a must have almost.(I...

yours is slightly larger and I see you compiled it from a root folder: /PSXLinux/... while CyrusDevX had the path /home/kostya/kernel/PSXLinux/... It might not be too important, but it wont hurt me to try the same thing. I know its posible on x86 to include a small initram fs with the kernel, but im...

Time for me to try again, how did you convert the resulting kernel file into an ecoff file or how did you transfer the kernel to the PS1 ? I would love to try reverseing the memorycard code (or write new one, cause it looks like its kinda lost) For experience I tried this: http://mgalgs.github.io/20...

Here is a "Like" from me, Thanks for sharing :D (not so many difernces :P I dont understand yet all locations what they do but version numbers, dates and some small bytes are changed (some call locations maybe? ... the SCHP-5000 Japan only, according to wiki, some hardware changes... intre...

https://www.aliexpress.com/item/CJMCU-CP2102-MICRO-USB-to-UART-TTL-Module-6Pin-Serial-Converter-UART-STC-Replace-FT232-NEW/32587986095.html I installed this one yesterday succesfully. it has a DTR pin, and I plan on getting the DSR out aswell... but for those resend Serial sending applications, you ...

I have a nice small Plotter for MSX computers, im sure im able to control it from the PS1 one day. Wordperfect probably aswell, if I can get the plotter to accept printcommands over serial. Too many ideas, so little time (or money... mostly time to get money to get projects done) Ill be asking about...