Search found 15 matches
- July 29th, 2023, 2:11 pm
- Forum: Hardware
- Topic: [Hardware Mod] NTSC/PAL reference oscillator mod for PU-18
- Replies: 64
- Views: 194075
Re: [Hardware Mod] NTSC/PAL reference oscillator mod for PU-18
There is a mistake on this, the RF choke and resistor are the wrong way around on the "parts to install" picture for top of PU8, you want RF choke on the power pin and the resistor on the clock out.
- January 30th, 2022, 1:51 am
- Forum: Hardware
- Topic: Problem connecting my PS1 to a crt tv with scart rgb cable
- Replies: 2
- Views: 8097
Re: Problem connecting my PS1 to a crt tv with scart rgb cable
are you sure it supports RGBs. SCART often only supports composite / S video
I've got a Loewe with 2 scart inputs and only one supports RGB.
I've got a Loewe with 2 scart inputs and only one supports RGB.
- December 13th, 2021, 1:54 pm
- Forum: Hardware
- Topic: PlayStation PAL Series Colour/Color Modification (PAL60)
- Replies: 95
- Views: 242935
Re: PlayStation PAL Series Colour/Color Modification (PAL60)
Also for completeness DFO only outputs PAL and NTSC GPU clocks, this is fine for older models (sub carriers derived from these freq's) but PU22+ with a DFO only fixes the GPU frequency for scalers. It won't correct the sub carrier. You may as well cut the track, separate the 2 clock input pins to th...
- December 13th, 2021, 1:16 pm
- Forum: Hardware
- Topic: PlayStation PAL Series Colour/Color Modification (PAL60)
- Replies: 95
- Views: 242935
Re: PlayStation PAL Series Colour/Color Modification (PAL60)
I first did this mod more than half a lifetime ago! I had an SCPH7502 as a teenager. Original documents suggest only a link wire and no pin lift.. I still remember getting my old crow kit to install in the mail! and having to patch games (it may have being a newer stealth chip, and I opted for less ...
- December 13th, 2021, 12:58 pm
- Forum: Hardware
- Topic: [Hardware Mod] NTSC/PAL reference oscillator mod for PU-18
- Replies: 64
- Views: 194075
Re: [Hardware Mod] NTSC/PAL reference oscillator mod for PU-18
The large 5v crystals are available and work perfect with 3.3v (well ~3.6), the SMD ones on the PSX work fine at 5v too. https://github.com/L10N37/PSXTAL I have multiple versions of region free PSX PCB, 2 physical crystals for up to PU20 SI5351 version (one clock output, programmed on the fly during...
- September 27th, 2021, 3:06 am
- Forum: Hardware
- Topic: Open source IGR and wireless dual XTAL switch
- Replies: 0
- Views: 7000
Open source IGR and wireless dual XTAL switch
https://github.com/L10N37/PSXTAL Thought I may as well share this You can swith between true PAL 50hz and NTSC 60hz on SCPH1002 / SCPH5502 By holding L1 + R1 + circle for about 4 seconds It also offers short and long pulse in game reset It's for Arduino nano (I use 168P clones for this so far) The J...
- August 21st, 2021, 2:43 am
- Forum: Hardware
- Topic: New modchip full stealth, single wire BIOS patch PM41
- Replies: 2
- Views: 4416
Re: New modchip full stealth, single wire BIOS patch PM41
https://github.com/L10N37/tehUberChip_A ... /PIC12F675
Now ported my PM41 UBER-D-D chip to raw assembly for PIC 12F675
This is with a single wire BIOS patch, and like my PU22/PU23 version, no gate wire required. One I/O Pin left to spare.
Now ported my PM41 UBER-D-D chip to raw assembly for PIC 12F675
This is with a single wire BIOS patch, and like my PU22/PU23 version, no gate wire required. One I/O Pin left to spare.
- August 18th, 2021, 11:58 am
- Forum: Hardware
- Topic: PSNee V8 - Ultimate PSX unlocker
- Replies: 25
- Views: 34139
Re: PSNee V8 - Ultimate PSX unlocker
Good work on the chip! I'm currently porting a new modchip across to PIC in ASM and just an idea I used to disable my modchip Check the drive lid status on power on as oppose to installing an actual switch. This way, you only need to boot the console with the lid open, then close it and you have rem...
- August 7th, 2021, 1:21 am
- Forum: Hardware
- Topic: New modchip full stealth, single wire BIOS patch PM41
- Replies: 2
- Views: 4416
- July 31st, 2021, 5:57 pm
- Forum: Hardware
- Topic: New modchip full stealth, single wire BIOS patch PM41
- Replies: 2
- Views: 4416
New modchip full stealth, single wire BIOS patch PM41
I've made a new 4 wire stealth No WFCK/ Gate wire for PU22 / PU23/ PM41 Full stealth on testing so far, stops spamming injection string at the perfect time Just finishing up a single wire BIOS patch, I've had 5/6 perfect boots everytime on a variety of NTSC games https://www.youtube.com/watch?v=fKqG...
- June 17th, 2021, 4:42 pm
- Forum: Homebrew (General)
- Topic: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
- Replies: 11
- Views: 20406
Re: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
That would have been awesoome, but unfortunately doesn't seem to work. Tried both genuine and aftermarket cards. It also have a character limit of 8 which some exceed but still fails on the ones less than 8 characters long.
- June 17th, 2021, 10:46 am
- Forum: Work Logs & Projects
- Topic: memcarduino not working
- Replies: 1
- Views: 9395
Re: memcarduino not working
You can check the memcarduino thread, i signed up here pretty much because of the same issue
- June 17th, 2021, 10:14 am
- Forum: Homebrew (General)
- Topic: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
- Replies: 11
- Views: 20406
Re: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
I think what we need most is a TonyHax CD that lets us select the hacked save-game that we want to use and writes it to the memory card. To load it we would just need to do the swap trick one time, and let it make a TonyHax memory card. This could be possible but you'd have to have a memory card wi...
- June 17th, 2021, 10:04 am
- Forum: Homebrew (General)
- Topic: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
- Replies: 11
- Views: 20406
Re: TonyHax Boot CD is TonyHax without the Hax, Tony, and memory card or specific game requirements
just use unirom and stop messing about swapping discs I don’t have a cheat device, and I bought this console specifically to do the CD player swap trick method which stops the disc when you swap. Now if I swap this boot cd I have no TOC incompatibilities and CD Audio works. Why would I buy anythi...
- June 17th, 2021, 9:54 am
- Forum: Work Logs & Projects
- Topic: MemCARDuino - Arduino PlayStation 1 Memory Card reader
- Replies: 67
- Views: 234841
Re: MemCARDuino - Arduino Memory Card reader
To Meta above: On GITHUB - its the first link if you google "memcarduino" Ok guys - so I am here to basically make sure no one gets frustrated with this project, I appreciate the dev sharing it! A dexdrive is 70AUD at the moment - theres a new one on ebay - an arduino and parts laying arou...