How would an internal fan kill the looks?
Using the PSU from another model sounds like a good idea!
Search found 9 matches
- November 12th, 2020, 5:25 am
- Forum: Hardware
- Topic: Increasing the longevity of a SCPH-100x?
- Replies: 2
- Views: 5618
- November 7th, 2020, 11:55 pm
- Forum: Hardware
- Topic: Increasing the longevity of a SCPH-100x?
- Replies: 2
- Views: 5618
Increasing the longevity of a SCPH-100x?
So I've been thinking about how I could increase my systems longevity, since the unit had a defective laser when I picked it up I replaced it with a KSM-440BAM and it worked perfectly fine again. I also installed a PSIO so the drive only needs to be used for games which have compatibility issues (if...
- November 19th, 2019, 9:57 am
- Forum: General Chat & Messaging
- Topic: DualShock replacement joystick (axis sensor)?
- Replies: 0
- Views: 11291
DualShock replacement joystick (axis sensor)?
So I got a few DualShocks with small defects but otherwise decent condition, two of those have loose or non-working joysticks (the whole axis sensor not the plastic stick) and I'd like to replace them. I found some ebay listings with axis sensors which apparently fit into every controller starting f...
- November 17th, 2019, 9:26 pm
- Forum: General Chat & Messaging
- Topic: Which replacement laser for which revision?
- Replies: 5
- Views: 18332
Re: Which replacement laser for which revision?
Oh really? So I can just install BAMs in all systems, that's nice! Just found the extension on Aliexpress. Thanks for the tip!
- November 14th, 2019, 9:13 pm
- Forum: CD-ROM
- Topic: PSX reads original discs but no backups
- Replies: 7
- Views: 19276
Re: PSX reads original discs but no backups
BTW I replaced the laser in my 1002 with the BAM and now it reads backups and originals again, so the 11$ I spent on the drive and the 5€ I spent for the system itself was definitely worth it. Installed a PsNee and the switchboard for my PSIO, cleaned the system and now got a fully modded system i...
- November 14th, 2019, 9:10 pm
- Forum: General Chat & Messaging
- Topic: Which replacement laser for which revision?
- Replies: 5
- Views: 18332
Which replacement laser for which revision?
I got a couple of systems with defective lasers or reading issues. I've fixed one of them, my SCPH-1002, by replacing the laser with a KSM-440BAM and now the system can read backups and originals perfectly fine again. I still got an SCPH-5002, an SCPH-7502 and an SCPH-9002. AFAIK the length of the r...
- August 17th, 2019, 9:03 pm
- Forum: CD-ROM
- Topic: PSX reads original discs but no backups
- Replies: 7
- Views: 19276
Re: PSX reads original discs but no backups
The laser arrived today, how do I know if it's old stock or a clone?
- August 13th, 2019, 5:56 am
- Forum: CD-ROM
- Topic: PSX reads original discs but no backups
- Replies: 7
- Views: 19276
Re: PSX reads original discs but no backups
These drives still suffer from friction related material loss and thus, misalignment. It's indeed an ACM and since there is no grease on the sled nor the gears it's highly likely to have worn out. That would also explain the rattling sounds it makes. I already tried adjusting the pot but I can't ac...
- August 8th, 2019, 11:08 pm
- Forum: CD-ROM
- Topic: PSX reads original discs but no backups
- Replies: 7
- Views: 19276
PSX reads original discs but no backups
So I've bought a batch of three PSXes which were apparently broken so I could try to repair at least one of 'em. Turns out none of the systems are actually broken, they just seem to have some disc reading issues. The SCPH-1002 had a modchip in it (12C508A, probably an MM3?) and it had the issue that...